Good choice vetis, since now you are using as Linux, you have how you make some settings at the traffic lights. So you can use the maximum server.
follows some tips for tuning.
* Edit the Linux semaphore file:
/etc/sysctl.conf
-Adicate the following lines
Select all
kernel.shmmax = 503316480
kernel.shmall = 503316480
kernel.sem = 160 320 128 128
These Values ??are based on the server's memoria in the example: This server has 512MB RAM, in bytes is a number of 536870912 bytes
512 x 1024 x 1024 = 536870912 or else use the command
$free -b
]
knowing that Linux needs 32MB to operate normally. Make the following account.
32 x 1024 x 1024 = 33554432 bytes
Take your mémia 536870912 - 33554432 = 503316480 This result will be used for the parameters
kernel.shmmax
and
kernel.shmall
Now the kernel.sem parameters is reached with the following information.
Checking the init.ora You will find a number referencing:
Standard is 150 Processes
Take this number and add 10, where 160 is 160, the second Number simply multiply by 2 o 160 getting 320. The last two numbers are patterns 128 128.
Then simply restart the server, for the settings to enter action, or then run the command as root:
After these settings here, the result was visibly very good!