Operating System Error Codes

Use este forum para coisas que não tem nada a ver com Oracle.
Post Reply
diegolenhardt
Moderador
Moderador
Posts: 1177
Joined: Thu, 15 Oct 2009 10:28 am
Location: Recife

Sometimes we receive error message in applications, but are messages from the operating system, such as I / O Error 51, for example, below a table with all:

Select all

Code 
 Description 
 Name 
  
0 
 The operation completed successfully. 
 ERROR_SUCCESS 
  
1 
 Incorrect function. 
 ERROR_INVALID_FUNCTION 
  
2 
 The system cannot find the file specified. 
 ERROR_FILE_NOT_FOUND 
  
3 
 The system cannot find the path specified. 
 ERROR_PATH_NOT_FOUND 
  
4 
 The system cannot open the file. 
 ERROR_TOO_MANY_OPEN_FILES 
  
5 
 Access is denied. 
 ERROR_ACCESS_DENIED 
  
6 
 The handle is invalid. 
 ERROR_INVALID_HANDLE 
  
7 
 The storage control blocks were destroyed. 
 ERROR_ARENA_TRASHED 
  
8 
 Not enough storage is available to process this command. 
 ERROR_NOT_ENOUGH_MEMORY 
  
9 
 The storage control block address is invalid. 
 ERROR_INVALID_BLOCK 
  
10 
 The environment is incorrect. 
 ERROR_BAD_ENVIRONMENT 
  
11 
 An attempt was made to load a program with an incorrect format. 
 ERROR_BAD_FORMAT 
  
12 
 The access code is invalid. 
 ERROR_INVALID_ACCESS 
  
13 
 The data is invalid. 
 ERROR_INVALID_DATA 
  
14 
 Not enough storage is available to complete this operation. 
 ERROR_OUTOFMEMORY 
  
15 
 The system cannot find the drive specified. 
 ERROR_INVALID_DRIVE 
  
16 
 The directory cannot be removed. 
 ERROR_CURRENT_DIRECTORY 
  
17 
 The system cannot move the file to a different disk drive. 
 ERROR_NOT_SAME_DEVICE 
  
18 
 There are no more files. 
 ERROR_NO_MORE_FILES 
  
19 
 The media is write protected. 
 ERROR_WRITE_PROTECT 
  
20 
 The system cannot find the device specified. 
 ERROR_BAD_UNIT 
  
21 
 The device is not ready. 
 ERROR_NOT_READY 
  
22 
 The device does not recognize the command. 
 ERROR_BAD_COMMAND 
  
23 
 Data error (cyclic redundancy check). 
 ERROR_CRC 
  
24 
 The program issued a command but the command length is incorrect. 
 ERROR_BAD_LENGTH 
  
25 
 The drive cannot locate a specific area or track on the disk. 
 ERROR_SEEK 
  
26 
 The specified disk or diskette cannot be accessed. 
 ERROR_NOT_DOS_DISK 
  
27 
 The drive cannot find the sector requested. 
 ERROR_SECTOR_NOT_FOUND 
  
28 
 The printer is out of paper. 
 ERROR_OUT_OF_PAPER 
  
29 
 The system cannot write to the specified device. 
 ERROR_WRITE_FAULT 
  
30 
 The system cannot read from the specified device. 
 ERROR_READ_FAULT 
  
31 
 A device attached to the system is not functioning. 
 ERROR_GEN_FAILURE 
  
32 
 The process cannot access the file because it is being used by another process. 
 ERROR_SHARING_VIOLATION 
  
33 
 The process cannot access the file because another process has locked a portion of the file. 
 ERROR_LOCK_VIOLATION 
  
34 
 The wrong diskette is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1. 
 ERROR_WRONG_DISK 
  
36 
 Too many files opened for sharing. 
 ERROR_SHARING_BUFFER_EXCEEDED 
  
38 
 Reached the end of the file. 
 ERROR_HANDLE_EOF 
  
39 
 The disk is full. 
 ERROR_HANDLE_DISK_FULL 
  
50 
 The network request is not supported. 
 ERROR_NOT_SUPPORTED 
  
51 
 The remote computer is not available. 
 ERROR_REM_NOT_LIST 
  
52 
 A duplicate name exists on the network. 
 ERROR_DUP_NAME 
  
53 
 The network path was not found. 
 ERROR_BAD_NETPATH 
  
54 
 The network is busy. 
 ERROR_NETWORK_BUSY 
  
55 
 The specified network resource or device is no longer available. 
 ERROR_DEV_NOT_EXIST 
  
56 
 The network BIOS command limit has been reached. 
 ERROR_TOO_MANY_CMDS 
  
57 
 A network adapter hardware error occurred. 
 ERROR_ADAP_HDW_ERR 
  
58 
 The specified server cannot perform the requested operation. 
 ERROR_BAD_NET_RESP 
  
59 
 An unexpected network error occurred. 
 ERROR_UNEXP_NET_ERR 
  
60 
 The remote adapter is not compatible. 
 ERROR_BAD_REM_ADAP 
  
61 
 The printer queue is full. 
 ERROR_PRINTQ_FULL 
  
62 
 Space to store the file waiting to be printed is not available on the server. 
 ERROR_NO_SPOOL_SPACE 
  
63 
 Your file waiting to be printed was deleted. 
 ERROR_PRINT_CANCELLED 
  
64 
 The specified network name is no longer available. 
 ERROR_NETNAME_DELETED 
  
65 
 Network access is denied. 
 ERROR_NETWORK_ACCESS_DENIED 
  
66 
 The network resource type is not correct. 
 ERROR_BAD_DEV_TYPE 
  
67 
 The network name cannot be found. 
 ERROR_BAD_NET_NAME 
  
68 
 The name limit for the local computer network adapter card was exceeded. 
 ERROR_TOO_MANY_NAMES 
  
69 
 The network BIOS session limit was exceeded. 
 ERROR_TOO_MANY_SESS 
  
70 
 The remote server has been paused or is in the process of being started. 
 ERROR_SHARING_PAUSED 
  
71 
 No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept. 
 ERROR_REQ_NOT_ACCEP 
  
72 
 The specified printer or disk device has been paused. 
 ERROR_REDIR_PAUSED 
  
80 
 The file exists. 
 ERROR_FILE_EXISTS 
  
82 
 The directory or file cannot be created. 
 ERROR_CANNOT_MAKE 
  
83 
 Fail on INT 24. 
 ERROR_FAIL_I24 
  
84 
 Storage to process this request is not available. 
 ERROR_OUT_OF_STRUCTURES 
  
85 
 The local device name is already in use. 
 ERROR_ALREADY_ASSIGNED 
  
86 
 The specified network password is not correct. 
 ERROR_INVALID_PASSWORD 
  
87 
 The parameter is incorrect. 
 ERROR_INVALID_PARAMETER 
  
88 
 A write fault occurred on the network. 
 ERROR_NET_WRITE_FAULT 
  
89 
 The system cannot start another process at this time. 
 ERROR_NO_PROC_SLOTS 
  
100 
 Cannot create another system semaphore. 
 ERROR_TOO_MANY_SEMAPHORES 
  
101 
 The exclusive semaphore is owned by another process. 
 ERROR_EXCL_SEM_ALREADY_OWNED 
  
102 
 The semaphore is set and cannot be closed. 
 ERROR_SEM_IS_SET 
  
103 
 The semaphore cannot be set again. 
 ERROR_TOO_MANY_SEM_REQUESTS 
  
104 
 Cannot request exclusive semaphores at interrupt time. 
 ERROR_INVALID_AT_INTERRUPT_TIME 
  
105 
 The previous ownership of this semaphore has ended. 
 ERROR_SEM_OWNER_DIED 
  
106 
 Insert the diskette for drive %1. 
 ERROR_SEM_USER_LIMIT 
  
107 
 The program stopped because an alternate diskette was not inserted. 
 ERROR_DISK_CHANGE 
  
108 
 The disk is in use or locked by another process. 
 ERROR_DRIVE_LOCKED 
  
109 
 The pipe has been ended. 
 ERROR_BROKEN_PIPE 
  
110 
 The system cannot open the device or file specified. 
 ERROR_OPEN_FAILED 
  
111 
 The file name is too long. 
 ERROR_BUFFER_OVERFLOW 
  
112 
 There is not enough space on the disk. 
 ERROR_DISK_FULL 
  
113 
 No more internal file identifiers available. 
 ERROR_NO_MORE_SEARCH_HANDLES 
  
114 
 The target internal file identifier is incorrect. 
 ERROR_INVALID_TARGET_HANDLE 
  
117 
 The IOCTL call made by the application program is not correct. 
 ERROR_INVALID_CATEGORY 
  
118 
 The verify-on-write switch parameter value is not correct. 
 ERROR_INVALID_VERIFY_SWITCH 
  
119 
 The system does not support the command requested. 
 ERROR_BAD_DRIVER_LEVEL 
  
120 
 This function is not valid on this platform. 
 ERROR_CALL_NOT_IMPLEMENTED 
  
121 
 The semaphore time-out period has expired. 
 ERROR_SEM_TIMEOUT 
  
122 
 The data area passed to a system call is too small. 
 ERROR_INSUFFICIENT_BUFFER 
  
123 
 The filename, directory name, or volume label syntax is incorrect. 
 ERROR_INVALID_NAME 
  
124 
 The system call level is not correct. 
 ERROR_INVALID_LEVEL 
  
125 
 The disk has no volume label. 
 ERROR_NO_VOLUME_LABEL 
  
126 
 The specified module could not be found. 
 ERROR_MOD_NOT_FOUND 
  
127 
 The specified procedure could not be found. 
 ERROR_PROC_NOT_FOUND 
  
128 
 There are no child processes to wait for. 
 ERROR_WAIT_NO_CHILDREN 
  
129 
 The %1 application cannot be run in Windows NT mode. 
 ERROR_CHILD_NOT_COMPLETE 
  
130 
 Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O. 
 ERROR_DIRECT_ACCESS_HANDLE 
  
131 
 An attempt was made to move the file pointer before the beginning of the file. 
 ERROR_NEGATIVE_SEEK 
  
132 
 The file pointer cannot be set on the specified device or file. 
 ERROR_SEEK_ON_DEVICE 
  
133 
 A JOIN or SUBST command cannot be used for a drive that contains previously joined drives. 
 ERROR_IS_JOIN_TARGET 
  
134 
 An attempt was made to use a JOIN or SUBST command on a drive that has already been joined. 
 ERROR_IS_JOINED 
  
135 
 An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted. 
 ERROR_IS_SUBSTED 
  
136 
 The system tried to delete the JOIN of a drive that is not joined. 
 ERROR_NOT_JOINED 
  
137 
 The system tried to delete the substitution of a drive that is not substituted. 
 ERROR_NOT_SUBSTED 
  
138 
 The system tried to join a drive to a directory on a joined drive. 
 ERROR_JOIN_TO_JOIN 
  
139 
 The system tried to substitute a drive to a directory on a substituted drive. 
 ERROR_SUBST_TO_SUBST 
  
140 
 The system tried to join a drive to a directory on a substituted drive. 
 ERROR_JOIN_TO_SUBST 
  
141 
 The system tried to SUBST a drive to a directory on a joined drive. 
 ERROR_SUBST_TO_JOIN 
  
142 
 The system cannot perform a JOIN or SUBST at this time. 
 ERROR_BUSY_DRIVE 
  
143 
 The system cannot join or substitute a drive to or for a directory on the same drive. 
 ERROR_SAME_DRIVE 
  
144 
 The directory is not a subdirectory of the root directory. 
 ERROR_DIR_NOT_ROOT 
  
145 
 The directory is not empty. 
 ERROR_DIR_NOT_EMPTY 
  
146 
 The path specified is being used in a substitute. 
 ERROR_IS_SUBST_PATH 
  
147 
 Not enough resources are available to process this command. 
 ERROR_IS_JOIN_PATH 
  
148 
 The path specified cannot be used at this time. 
 ERROR_PATH_BUSY 
  
149 
 An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute. 
 ERROR_IS_SUBST_TARGET 
  
150 
 System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed. 
 ERROR_SYSTEM_TRACE 
  
151 
 The number of specified semaphore events for DosMuxSemWait is not correct. 
 ERROR_INVALID_EVENT_COUNT 
  
152 
 DosMuxSemWait did not execute; too many semaphores are already set. 
 ERROR_TOO_MANY_MUXWAITERS 
  
153 
 The DosMuxSemWait list is not correct. 
 ERROR_INVALID_LIST_FORMAT 
  
154 
 The volume label you entered exceeds the label character limit of the target file system. 
 ERROR_LABEL_TOO_LONG 
  
155 
 Cannot create another thread. 
 ERROR_TOO_MANY_TCBS 
  
156 
 The recipient process has refused the signal. 
 ERROR_SIGNAL_REFUSED 
  
157 
 The segment is already discarded and cannot be locked. 
 ERROR_DISCARDED 
  
158 
 The segment is already unlocked. 
 ERROR_NOT_LOCKED 
  
159 
 The address for the thread ID is not correct. 
 ERROR_BAD_THREADID_ADDR 
  
160 
 The argument string passed to DosExecPgm is not correct. 
 ERROR_BAD_ARGUMENTS 
  
161 
 The specified path is invalid. 
 ERROR_BAD_PATHNAME 
  
162 
 A signal is already pending. 
 ERROR_SIGNAL_PENDING 
  
164 
 No more threads can be created in the system. 
 ERROR_MAX_THRDS_REACHED 
  
167 
 Unable to lock a region of a file. 
 ERROR_LOCK_FAILED 
  
170 
 The requested resource is in use. 
 ERROR_BUSY 
  
173 
 A lock request was not outstanding for the supplied cancel region. 
 ERROR_CANCEL_VIOLATION 
  
174 
 The file system does not support atomic changes to the lock type. 
 ERROR_ATOMIC_LOCKS_NOT_SUPPORTED 
  
180 
 The system detected a segment number that was not correct. 
 ERROR_INVALID_SEGMENT_NUMBER 
  
182 
 The operating system cannot run %1. 
 ERROR_INVALID_ORDINAL 
  
183 
 Cannot create a file when that file already exists. 
 ERROR_ALREADY_EXISTS 
  
186 
 The flag passed is not correct. 
 ERROR_INVALID_FLAG_NUMBER 
  
187 
 The specified system semaphore name was not found. 
 ERROR_SEM_NOT_FOUND 
  
188 
 The operating system cannot run %1. 
 ERROR_INVALID_STARTING_CODESEG 
  
189 
 The operating system cannot run %1. 
 ERROR_INVALID_STACKSEG 
  
190 
 The operating system cannot run %1. 
 ERROR_INVALID_MODULETYPE 
  
191 
 Cannot run %1 in Windows NT mode. 
 ERROR_INVALID_EXE_SIGNATURE 
  
192 
 The operating system cannot run %1. 
 ERROR_EXE_MARKED_INVALID 
  
193 
 Is not a valid application. 
 ERROR_BAD_EXE_FORMAT 
  
194 
 The operating system cannot run %1. 
 ERROR_ITERATED_DATA_EXCEEDS_64k 
  
195 
 The operating system cannot run %1. 
 ERROR_INVALID_MINALLOCSIZE 
  
196 
 The operating system cannot run this application program. 
 ERROR_DYNLINK_FROM_INVALID_RING 
  
197 
 The operating system is not presently configured to run this application. 
 ERROR_IOPL_NOT_ENABLED 
  
198 
 The operating system cannot run %1. 
 ERROR_INVALID_SEGDPL 
  
199 
 The operating system cannot run this application program. 
 ERROR_AUTODATASEG_EXCEEDS_64k 
  
200 
 The code segment cannot be greater than or equal to 64K. 
 ERROR_RING2SEG_MUST_BE_MOVABLE 
  
201 
 The operating system cannot run %1. 
 ERROR_RELOC_CHAIN_XEEDS_SEGLIM 
  
202 
 The operating system cannot run %1. 
 ERROR_INFLOOP_IN_RELOC_CHAIN 
  
203 
 The system could not find the environment option that was entered. 
 ERROR_ENVVAR_NOT_FOUND 
  
205 
 No process in the command subtree has a signal handler. 
 ERROR_NO_SIGNAL_SENT 
  
206 
 The filename or extension is too long. 
 ERROR_FILENAME_EXCED_RANGE 
  
207 
 The ring 2 stack is in use. 
 ERROR_RING2_STACK_IN_USE 
  
208 
 The global filename characters, * or ?, are entered incorrectly or too many global filename characters are specified. 
 ERROR_META_EXPANSION_TOO_LONG 
  
209 
 The signal being posted is not correct. 
 ERROR_INVALID_SIGNAL_NUMBER 
  
210 
 The signal handler cannot be set. 
 ERROR_THREAD_1_INACTIVE 
  
212 
 The segment is locked and cannot be reallocated. 
 ERROR_LOCKED 
  
214 
 Too many dynamic-link modules are attached to this program or dynamic-link module. 
 ERROR_TOO_MANY_MODULES 
  
215 
 Can't nest calls to LoadModule. 
 ERROR_NESTING_NOT_ALLOWED 
  
216 
 The image file %1 is valid, but is for a machine type other than the current machine. 
 ERROR_EXE_MACHINE_TYPE_MISMATCH 
  
230 
 The pipe state is invalid. 
 ERROR_BAD_PIPE 
  
231 
 All pipe instances are busy. 
 ERROR_PIPE_BUSY 
  
232 
 The pipe is being closed. 
 ERROR_NO_DATA 
  
233 
 No process is on the other end of the pipe. 
 ERROR_PIPE_NOT_CONNECTED 
  
234 
 More data is available. 
 ERROR_MORE_DATA 
  
240 
 The session was canceled. 
 ERROR_você_DISCONNECTED 
  
254 
 The specified extended attribute name was invalid. 
 ERROR_INVALID_EA_NAME 
  
255 
 The extended attributes are inconsistent. 
 ERROR_EA_LIST_INCONSISTENT 
  
259 
 No more data is available. 
 ERROR_NO_MORE_ITEMS 
  
266 
 The copy functions cannot be used. 
 ERROR_CANNOT_COPY 
  
267 
 The directory name is invalid. 
 ERROR_DIRECTORY 
  
275 
 The extended attributes did not fit in the buffer. 
 ERROR_EAS_DIDNT_FIT 
  
276 
 The extended attribute file on the mounted file system is corrupt. 
 ERROR_EA_FILE_CORRUPT 
  
277 
 The extended attribute table file is full. 
 ERROR_EA_TABLE_FULL 
  
278 
 The specified extended attribute handle is invalid. 
 ERROR_INVALID_EA_HANDLE 
  
282 
 The mounted file system does not support extended attributes. 
 ERROR_EAS_NOT_SUPPORTED 
  
288 
 Attempt to release mutex not owned by caller. 
 ERROR_NOT_OWNER 
  
298 
 Too many posts were made to a semaphore. 
 ERROR_TOO_MANY_POSTS 
  
299 
 Only part of a ReadProcessMemory or WriteProcessMemory request was completed. 
 ERROR_PARTIAL_COPY 
  
317 
 The system cannot find message text for message number 0x%1 in the message file for %2. 
 ERROR_MR_MID_NOT_FOUND 
  
487 
 Attempt to access invalid address. 
 ERROR_INVALID_ADDRESS 
  
534 
 Arithmetic result exceeded 32 bits. 
 ERROR_ARITHMETIC_OVERFLOW 
  
535 
 There is a process on other end of the pipe. 
 ERROR_PIPE_CONNECTED 
  
536 
 Waiting for a process to open the other end of the pipe. 
 ERROR_PIPE_LISTENING 
  
994 
 Access to the extended attribute was denied. 
 ERROR_EA_ACCESS_DENIED 
  
995 
 The I/O operation has been aborted because of either a thread exit or an application request. 
 ERROR_OPERATION_ABORTED 
  
996 
 Overlapped I/O event is not in a signaled state. 
 ERROR_IO_INCOMPLETE 
  
997 
 Overlapped I/O operation is in progress. 
 ERROR_IO_PENDING 
  
998 
 Invalid access to memory location. 
 ERROR_NOACCESS 
  
999 
 Error performing inpage operation. 
 ERROR_SWAPERROR 
  
1001 
 Recursion too deep; the stack overflowed. 
 ERROR_STACK_OVERFLOW 
  
1002 
 The window cannot act on the sent message. 
 ERROR_INVALID_MESSAGE 
  
1003 
 Cannot complete this function. 
 ERROR_CAN_NOT_COMPLETE 
  
1004 
 Invalid flags. 
 ERROR_INVALID_FLAGS 
  
1005 
 The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted. 
 ERROR_UNRECOGNIZED_VOLUME 
  
1006 
 The volume for a file has been externally altered so that the opened file is no longer valid. 
 ERROR_FILE_INVALID 
  
1007 
 The requested operation cannot be performed in full-screen mode. 
 ERROR_FULLSCREEN_MODE 
  
1008 
 An attempt was made to reference a token that does not exist. 
 ERROR_NO_TOKEN 
  
1009 
 The configuration registry database is corrupt. 
 ERROR_BADDB 
  
1010 
 The configuration registry key is invalid. 
 ERROR_BADKEY 
  
1011 
 The configuration registry key could not be opened. 
 ERROR_CANTOPEN 
  
1012 
 The configuration registry key could not be read. 
 ERROR_CANTREAD 
  
1013 
 The configuration registry key could not be written. 
 ERROR_CANTWRITE 
  
1014 
 One of the files in the registry database had to be recovered by use of a log or alternate copy. The recovery was successful. 
 ERROR_REGISTRY_RECOVERED 
  
1015 
 The registry is corrupted. The structure of one of the files that contains registry data is corrupted, or the system's image of the file in memory is corrupted, or the file could not be recovered because the alternate copy or log was absent or corrupted. 
 ERROR_REGISTRY_CORRUPT 
  
1016 
 An I/O operation initiated by the registry failed unrecoverably. The registry could not read in, or write out, or flush, one of the files that contain the system's image of the registry. 
 ERROR_REGISTRY_IO_FAILED 
  
1017 
 The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format. 
 ERROR_NOT_REGISTRY_FILE 
  
1018 
 Illegal operation attempted on a registry key that has been marked for deletion. 
 ERROR_KEY_DELETED 
  
1019 
 System could not allocate the required space in a registry log. 
 ERROR_NO_LOG_SPACE 
  
1020 
 Cannot create a symbolic link in a registry key that already has subkeys or values. 
 ERROR_KEY_HAS_CHILDREN 
  
1021 
 Cannot create a stable subkey under a volatile parent key. 
 ERROR_CHILD_MUST_BE_VOLATILE 
  
1022 
 A notify change request is being completed and the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes. 
 ERROR_NOTIFY_ENUM_DIR 
  
1051 
 A stop control has been sent to a service that other running services are dependent on. 
 ERROR_DEPENDENT_SERVICES_RUNNING 
  
1052 
 The requested control is not valid for this service. 
 ERROR_INVALID_SERVICE_CONTROL 
  
1053 
 The service did not respond to the start or control request in a timely fashion. 
 ERROR_SERVICE_REQUEST_TIMEOUT 
  
1054 
 A thread could not be created for the service. 
 ERROR_SERVICE_NO_THREAD 
  
1055 
 The service database is locked. 
 ERROR_SERVICE_DATABASE_LOCKED 
  
1056 
 An instance of the service is already running. 
 ERROR_SERVICE_ALREADY_RUNNING 
  
1057 
 The account name is invalid or does not exist. 
 ERROR_INVALID_SERVICE_ACCOUNT 
  
1058 
 The specified service is disabled and cannot be started. 
 ERROR_SERVICE_DISABLED 
  
1059 
 Circular service dependency was specified. 
 ERROR_CIRCULAR_DEPENDENCY 
  
1060 
 The specified service does not exist as an installed service. 
 ERROR_SERVICE_DOES_NOT_EXIST 
  
1061 
 The service cannot accept control messages at this time. 
 ERROR_SERVICE_CANNOT_ACCEPT_CTRL 
  
1062 
 The service has not been started. 
 ERROR_SERVICE_NOT_ACTIVE 
  
1063 
 The service process could not connect to the service controller. 
 ERROR_FAILED_SERVICE_CONTROLLER_CONNECT 
  
1064 
 An exception occurred in the service when handling the control request. 
 ERROR_EXCEPTION_IN_SERVICE 
  
1065 
 The database specified does not exist. 
 ERROR_DATABASE_DOES_NOT_EXIST 
  
1066 
 The service has returned a service-specific error code. 
 ERROR_SERVICE_SPECIFIC_ERROR 
  
1067 
 The process terminated unexpectedly. 
 ERROR_PROCESS_ABORTED 
  
1068 
 The dependency service or group failed to start. 
 ERROR_SERVICE_DEPENDENCY_FAIL 
  
1069 
 The service did not start due to a logon failure. 
 ERROR_SERVICE_LOGON_FAILED 
  
1070 
 After starting, the service hung in a start-pending state. 
 ERROR_SERVICE_START_HANG 
  
1071 
 The specified service database lock is invalid. 
 ERROR_INVALID_SERVICE_LOCK 
  
1072 
 The specified service has been marked for deletion. 
 ERROR_SERVICE_MARKED_FOR_DELETE 
  
1073 
 The specified service already exists. 
 ERROR_SERVICE_EXISTS 
  
1074 
 The system is currently running with the last-known-good configuration. 
 ERROR_ALREADY_RUNNING_LKG 
  
1075 
 The dependency service does not exist or has been marked for deletion. 
 ERROR_SERVICE_DEPENDENCY_DELETED 
  
1076 
 The current boot has already been accepted for use as the last-known-good control set. 
 ERROR_BOOT_ALREADY_ACCEPTED 
  
1077 
 No attempts to start the service have been made since the last boot. 
 ERROR_SERVICE_NEVER_STARTED 
  
1078 
 The name is already in use as either a service name or a service display name. 
 ERROR_DUPLICATE_SERVICE_NAME 
  
1079 
 The account specified for this service is different from the account specified for other services running in the same process. 
 ERROR_DIFFERENT_SERVICE_ACCOUNT 
  
1100 
 The physical end of the tape has been reached. 
 ERROR_END_OF_MEDIA 
  
1101 
 A tape access reached a filemark. 
 ERROR_FILEMARK_DETECTED 
  
1102 
 The beginning of the tape or partition was encountered. 
 ERROR_BEGINNING_OF_MEDIA 
  
1103 
 A tape access reached the end of a set of files. 
 ERROR_SETMARK_DETECTED 
  
1104 
 No more data is on the tape. 
 ERROR_NO_DATA_DETECTED 
  
1105 
 Tape could not be partitioned. 
 ERROR_PARTITION_FAILURE 
  
1106 
 When accessing a new tape of a multivolume partition, the current block size is incorrect. 
 ERROR_INVALID_BLOCK_LENGTH 
  
1107 
 Tape partition information could not be found when loading a tape. 
 ERROR_DEVICE_NOT_PARTITIONED 
  
1108 
 Unable to lock the media eject mechanism. 
 ERROR_UNABLE_TO_LOCK_MEDIA 
  
1109 
 Unable to unload the media. 
 ERROR_UNABLE_TO_UNLOAD_MEDIA 
  
1110 
 The media in the drive may have changed. 
 ERROR_MEDIA_CHANGED 
  
1111 
 The I/O bus was reset. 
 ERROR_BUS_RESET 
  
1112 
 No media in drive. 
 ERROR_NO_MEDIA_IN_DRIVE 
  
1113 
 No mapping for the Unicode character exists in the target multibyte code page. 
 ERROR_NO_UNICODE_TRANSLATION 
  
1114 
 A dynamic link library (DLL) initialization routine failed. 
 ERROR_DLL_INIT_FAILED 
  
1115 
 A system shutdown is in progress. 
 ERROR_SHUTDOWN_IN_PROGRESS 
  
1116 
 Unable to abort the system shutdown because no shutdown was in progress. 
 ERROR_NO_SHUTDOWN_IN_PROGRESS 
  
1117 
 The request could not be performed because of an I/O device error. 
 ERROR_IO_DEVICE 
  
1118 
 No serial device was successfully initialized. The serial driver will unload. 
 ERROR_SERIAL_NO_DEVICE 
  
1119 
 Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened. 
 ERROR_IRQ_BUSY 
  
1120 
 A serial I/O operation was completed by another write to the serial port. The IOCTL_SERIAL_XOFF_COUNTER reached zero.) 
 ERROR_MORE_WRITES 
  
1121 
 A serial I/O operation completed because the time-out period expired. (The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.) 
 ERROR_COUNTER_TIMEOUT 
  
1122 
 No ID address mark was found on the floppy disk. 
 ERROR_FLOPPY_ID_MARK_NOT_FOUND 
  
1123 
 Mismatch between the floppy disk sector ID field and the floppy disk controller track address. 
 ERROR_FLOPPY_WRONG_CYLINDER 
  
1124 
 The floppy disk controller reported an error that is not recognized by the floppy disk driver. 
 ERROR_FLOPPY_UNKNOWN_ERROR 
  
1125 
 The floppy disk controller returned inconsistent results in its registers. 
 ERROR_FLOPPY_BAD_REGISTERS 
  
1126 
 While accessing the hard disk, a recalibrate operation failed, even after retries. 
 ERROR_DISK_RECALIBRATE_FAILED 
  
1127 
 While accessing the hard disk, a disk operation failed even after retries. 
 ERROR_DISK_OPERATION_FAILED 
  
1128 
 While accessing the hard disk, a disk controller reset was needed, but even that failed. 
 ERROR_DISK_RESET_FAILED 
  
1129 
 Physical end of tape encountered. 
 ERROR_EOM_OVERFLOW 
  
1130 
 Not enough server storage is available to process this command. 
 ERROR_NOT_ENOUGH_SERVER_MEMORY 
  
1131 
 A potential deadlock condition has been detected. 
 ERROR_POSSIBLE_DEADLOCK 
  
1132 
 The base address or the file offset specified does not have the proper alignment. 
 ERROR_MAPPED_ALIGNMENT 
  
1140 
 An attempt to change the system power state was vetoed by another application or driver. 
 ERROR_SET_POWER_STATE_VETOED 
  
1141 
 The system BIOS failed an attempt to change the system power state. 
 ERROR_SET_POWER_STATE_FAILED 
  
1142 
 An attempt was made to create more links on a file than the file system supports. 
 ERROR_TOO_MANY_LINKS 
  
1150 
 The specified program requires a newer version of Windows. 
 ERROR_OLD_WIN_VERSION 
  
1151 
 The specified program is not a Windows or MS-DOS program. 
 ERROR_APP_WRONG_OS 
  
1152 
 Cannot start more than one instance of the specified program. 
 ERROR_SINGLE_INSTANCE_APP 
  
1153 
 The specified program was written for an earlier version of Windows. 
 ERROR_RMODE_APP 
  
1154 
 One of the library files needed to run this application is damaged. 
 ERROR_INVALID_DLL 
  
1155 
 No application is associated with the specified file for this operation. 
 ERROR_NO_ASSOCIATION 
  
1156 
 An error occurred in sending the command to the application. 
 ERROR_DDE_FAIL 
  
1157 
 One of the library files needed to run this application cannot be found. 
 ERROR_DLL_NOT_FOUND 
  
1200 
 The specified device name is invalid. 
 ERROR_BAD_DEVICE 
  
1201 
 The device is not currently connected but it is a remembered connection. 
 ERROR_CONNECTION_UNAVAIL 
  
1202 
 An attempt was made to remember a device that had previously been remembered. 
 ERROR_DEVICE_ALREADY_REMEMBERED 
  
1203 
 No network provider accepted the given network path. 
 ERROR_NO_NET_OR_BAD_PATH 
  
1204 
 The specified network provider name is invalid. 
 ERROR_BAD_PROVIDER 
  
1205 
 Unable to open the network connection profile. 
 ERROR_CANNOT_OPEN_PROFILE 
  
1206 
 The network connection profile is corrupt. 
 ERROR_BAD_PROFILE 
  
1207 
 Cannot enumerate a noncontainer. 
 ERROR_NOT_CONTAINER 
  
1208 
 An extended error has occurred. 
 ERROR_EXTENDED_ERROR 
  
1209 
 The format of the specified group name is invalid. 
 ERROR_INVALID_GROUPNAME 
  
1210 
 The format of the specified computer name is invalid. 
 ERROR_INVALID_COMPUTERNAME 
  
1211 
 The format of the specified event name is invalid. 
 ERROR_INVALID_EVENTNAME 
  
1212 
 The format of the specified domain name is invalid. 
 ERROR_INVALID_DOMAINNAME 
  
1213 
 The format of the specified service name is invalid. 
 ERROR_INVALID_SERVICENAME 
  
1214 
 The format of the specified network name is invalid. 
 ERROR_INVALID_NETNAME 
  
1215 
 The format of the specified share name is invalid. 
 ERROR_INVALID_SHARENAME 
  
1216 
 The format of the specified password is invalid. 
 ERROR_INVALID_PASSWORDNAME 
  
1217 
 The format of the specified message name is invalid. 
 ERROR_INVALID_MESSAGENAME 
  
1218 
 The format of the specified message destination is invalid. 
 ERROR_INVALID_MESSAGEDEST 
  
1219 
 The credentials supplied conflict with an existing set of credentials. 
 ERROR_SESSION_CREDENTIAL_CONFLICT 
  
1220 
 An attempt was made to establish a session to a network server, but there are already too many sessions established to that server. 
 ERROR_REMOTE_SESSION_LIMIT_EXCEEDED 
  
1221 
 The workgroup or domain name is already in use by another computer on the network. 
 ERROR_DUP_DOMAINNAME 
  
1222 
 The network is not present or not started. 
 ERROR_NO_NETWORK 
  
1223 
 The operation was canceled by the user. 
 ERROR_CANCELLED 
  
1224 
 The requested operation cannot be performed on a file with a user-mapped section open. 
 ERROR_USER_MAPPED_FILE 
  
1225 
 The remote system refused the network connection. 
 ERROR_CONNECTION_REFUSED 
  
1226 
 The network connection was gracefully closed. 
 ERROR_GRACEFUL_DISCONNECT 
  
1227 
 The network transport endpoint already has an address associated with it. 
 ERROR_ADDRESS_ALREADY_ASSOCIATED 
  
1228 
 An address has not yet been associated with the network endpoint. 
 ERROR_ADDRESS_NOT_ASSOCIATED 
  
1229 
 An operation was attempted on a nonexistent network connection. 
 ERROR_CONNECTION_INVALID 
  
1230 
 An invalid operation was attempted on an active network connection. 
 ERROR_CONNECTION_ACTIVE 
  
1231 
 The remote network is not reachable by the transport. 
 ERROR_NETWORK_UNREACHABLE 
  
1232 
 The remote system is not reachable by the transport. 
 ERROR_HOST_UNREACHABLE 
  
1233 
 The remote system does not support the transport protocol. 
 ERROR_PROTOCOL_UNREACHABLE 
  
1234 
 No service is operating at the destination network endpoint on the remote system. 
 ERROR_PORT_UNREACHABLE 
  
1235 
 The request was aborted. 
 ERROR_REQUEST_ABORTED 
  
1236 
 The network connection was aborted by the local system. 
 ERROR_CONNECTION_ABORTED 
  
1237 
 The operation could not be completed. A retry should be performed. 
 ERROR_RETRY 
  
1238 
 A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached. 
 ERROR_CONNECTION_COUNT_LIMIT 
  
1239 
 Attempting to log in during an unauthorized time of day for this account. 
 ERROR_LOGIN_TIME_RESTRICTION 
  
1240 
 The account is not authorized to log in from this station. 
 ERROR_LOGIN_WKSTA_RESTRICTION 
  
1241 
 The network address could not be used for the operation requested. 
 ERROR_INCORRECT_ADDRESS 
  
1242 
 The service is already registered. 
 ERROR_ALREADY_REGISTERED 
  
1243 
 The specified service does not exist. 
 ERROR_SERVICE_NOT_FOUND 
  
1244 
 The operation being requested was not performed because the user has not been authenticated. 
 ERROR_NOT_AUTHENTICATED 
  
1245 
 The operation being requested was not performed because the user has not logged on to the network. The specified service does not exist. 
 ERROR_NOT_LOGGED_ON 
  
1246 
 Caller to continue with work in progress. 
 ERROR_CONTINUE 
  
1247 
 An attempt was made to perform an initialization operation when initialization has already been completed. 
 ERROR_ALREADY_INITIALIZED 
  
1248 
 No more local devices. 
 ERROR_NO_MORE_DEVICES 
  
1300 
 Not all privileges referenced are assigned to the caller. 
 ERROR_NOT_ALL_ASSIGNED 
  
1301 
 Some mapping between account names and security IDs was not done. 
 ERROR_SOME_NOT_MAPPED 
  
1302 
 No system quota limits are specifically set for this account. 
 ERROR_NO_QUOTAS_FOR_ACCOUNT 
  
1303 
 No encryption key is available. A well-known encryption key was returned. 
 ERROR_LOCAL_USER_SESSION_KEY 
  
1304 
 The password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a NULL string. 
 ERROR_NULL_LM_PASSWORD 
  
1305 
 The revision level is unknown. 
 ERROR_UNKNOWN_REVISION 
  
1306 
 Indicates two revision levels are incompatible. 
 ERROR_REVISION_MISMATCH 
  
1307 
 This security ID may not be assigned as the owner of this object. 
 ERROR_INVALID_OWNER 
  
1308 
 This security ID may not be assigned as the primary group of an object. 
 ERROR_INVALID_PRIMARY_GROUP 
  
1309 
 An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client. 
 ERROR_NO_IMPERSONATION_TOKEN 
  
1310 
 The group may not be disabled. 
 ERROR_CANT_DISABLE_MANDATORY 
  
1311 
 There are currently no logon servers available to service the logon request. 
 ERROR_NO_LOGON_SERVERS 
  
1312 
 A specified logon session does not exist. It may already have been terminated. 
 ERROR_NO_SUCH_LOGON_SESSION 
  
1313 
 A specified privilege does not exist. 
 ERROR_NO_SUCH_PRIVILEGE 
  
1314 
 A required privilege is not held by the client. 
 ERROR_PRIVILEGE_NOT_HELD 
  
1315 
 The name provided is not a properly formed account name. 
 ERROR_INVALID_ACCOUNT_NAME 
  
1316 
 The specified user already exists. 
 ERROR_USER_EXISTS 
  
1317 
 The specified user does not exist. 
 ERROR_NO_SUCH_USER 
  
1318 
 The specified group already exists. 
 ERROR_GROUP_EXISTS 
  
1319 
 The specified group does not exist. 
 ERROR_NO_SUCH_GROUP 
  
1320 
 Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member. 
 ERROR_MEMBER_IN_GROUP 
  
1321 
 The specified user account is not a member of the specified group account. 
 ERROR_MEMBER_NOT_IN_GROUP 
  
1322 
 The last remaining administration account cannot be disabled or deleted. 
 ERROR_LAST_ADMIN 
  
1323 
 Unable to update the password. The value provided as the current password is incorrect. 
 ERROR_WRONG_PASSWORD 
  
1324 
 Unable to update the password. The value provided for the new password contains values that are not allowed in passwords. 
 ERROR_ILL_FORMED_PASSWORD 
  
1325 
 Unable to update the password because a password update rule has been violated. 
 ERROR_PASSWORD_RESTRICTION 
  
1326 
 Logon failure: unknown user name or bad password. 
 ERROR_LOGON_FAILURE 
  
1327 
 Logon failure: user account restriction. 
 ERROR_ACCOUNT_RESTRICTION 
  
1328 
 Logon failure: account logon time restriction violation. 
 ERROR_INVALID_LOGON_HOURS 
  
1329 
 Logon failure: user not allowed to log on to this computer. 
 ERROR_INVALID_WORKSTATION 
  
1330 
 Logon failure: the specified account password has expired. 
 ERROR_PASSWORD_EXPIRED 
  
1331 
 Logon failure: account currently disabled. 
 ERROR_ACCOUNT_DISABLED 
  
1332 
 No mapping between account names and security IDs was done. 
 ERROR_NONE_MAPPED 
  
1333 
 Too many local user identifiers (LUIDs) were requested at one time. 
 ERROR_TOO_MANY_LUIDS_REQUESTED 
  
1334 
 No more local user identifiers (LUIDs) are available. 
 ERROR_LUIDS_EXHAUSTED 
  
1335 
 The subauthority part of a security ID is invalid for this particular use. 
 ERROR_INVALID_SUB_AUTHORITY 
  
1336 
 The access control list (ACL) structure is invalid. 
 ERROR_INVALID_ACL 
  
1337 
 The security ID structure is invalid. 
 ERROR_INVALID_SID 
  
1338 
 The security descriptor structure is invalid. 
 ERROR_INVALID_SECURITY_DESCR 
  
1340 
 The inherited access control list (ACL) or access control entry (ACE) could not be built. 
 ERROR_BAD_INHERITANCE_ACL 
  
1341 
 The server is currently disabled. 
 ERROR_SERVER_DISABLED 
  
1342 
 The server is currently enabled. 
 ERROR_SERVER_NOT_DISABLED 
  
1343 
 The value provided was an invalid value for an identifier authority. 
 ERROR_INVALID_ID_AUTHORITY 
  
1344 
 No more memory is available for security information updates. 
 ERROR_ALLOTTED_SPACE_EXCEEDED 
  
1345 
 The specified attributes are invalid, or incompatible with the attributes for the group as a whole. 
 ERROR_INVALID_GROUP_ATTRIBUTES 
  
1346 
 Either a required impersonation level was not provided, or the provided impersonation level is invalid. 
 ERROR_BAD_IMPERSONATION_LEVEL 
  
1347 
 Cannot open an anonymous level security token. 
 ERROR_CANT_OPEN_ANONYMOUS 
  
1348 
 The validation information class requested was invalid. 
 ERROR_BAD_VALIDATION_CLASS 
  
1349 
 The type of the token is inappropriate for its attempted use. 
 ERROR_BAD_TOKEN_TYPE 
  
1350 
 Unable to perform a security operation on an object that has no associated security. 
 ERROR_NO_SECURITY_ON_OBJECT 
  
1351 
 Indicates a Windows NT Server could not be contacted or that objects within the domain are protected such that necessary information could not be retrieved. 
 ERROR_CANT_ACCESS_DOMAIN_INFO 
  
1352 
 The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation. 
 ERROR_INVALID_SERVER_STATE 
  
1353 
 The domain was in the wrong state to perform the security operation. 
 ERROR_INVALID_DOMAIN_STATE 
  
1354 
 This operation is only allowed for the Primary Domain Controller of the domain. 
 ERROR_INVALID_DOMAIN_ROLE 
  
1355 
 The specified domain did not exist. 
 ERROR_NO_SUCH_DOMAIN 
  
1356 
 The specified domain already exists. 
 ERROR_DOMAIN_EXISTS 
  
1357 
 An attempt was made to exceed the limit on the number of domains per server. 
 ERROR_DOMAIN_LIMIT_EXCEEDED 
  
1358 
 Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk. 
 ERROR_INTERNAL_DB_CORRUPTION 
  
1359 
 The security account database contains an internal inconsistency. 
 ERROR_INTERNAL_ERROR 
  
1360 
 Generic access types were contained in an access mask which should already be mapped to nongeneric types. 
 ERROR_GENERIC_NOT_MAPPED 
  
1361 
 A security descriptor is not in the right format (absolute or self-relative). 
 ERROR_BAD_DESCRIPTOR_FORMAT 
  
1362 
 The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process. 
 ERROR_NOT_LOGON_PROCESS 
  
1363 
 Cannot start a new logon session with an ID that is already in use. 
 ERROR_LOGON_SESSION_EXISTS 
  
1364 
 A specified authentication package is unknown. 
 ERROR_NO_SUCH_PACKAGE 
  
1365 
 The logon session is not in a state that is consistent with the requested operation. 
 ERROR_BAD_LOGON_SESSION_STATE 
  
1366 
 The logon session ID is already in use. 
 ERROR_LOGON_SESSION_COLLISION 
  
1367 
 A logon request contained an invalid logon type value. 
 ERROR_INVALID_LOGON_TYPE 
  
1368 
 Unable to impersonate using a named pipe until data has been read from that pipe. 
 ERROR_CANNOT_IMPERSONATE 
  
1369 
 The transaction state of a registry subtree is incompatible with the requested operation. 
 ERROR_RXACT_INVALID_STATE 
  
1370 
 An internal security database corruption has been encountered. 
 ERROR_RXACT_COMMIT_FAILURE 
  
1371 
 Cannot perform this operation on built-in accounts. 
 ERROR_SPECIAL_ACCOUNT 
  
1372 
 Cannot perform this operation on this built-in special group. 
 ERROR_SPECIAL_GROUP 
  
1373 
 Cannot perform this operation on this built-in special user. 
 ERROR_SPECIAL_USER 
  
1374 
 The user cannot be removed from a group because the group is currently the user's primary group. 
 ERROR_MEMBERS_PRIMARY_GROUP 
  
1375 
 The token is already in use as a primary token. 
 ERROR_TOKEN_ALREADY_IN_USE 
  
1376 
 The specified local group does not exist. 
 ERROR_NO_SUCH_ALIAS 
  
1377 
 The specified account name is not a member of the local group. 
 ERROR_MEMBER_NOT_IN_ALIAS 
  
1378 
 The specified account name is already a member of the local group. 
 ERROR_MEMBER_IN_ALIAS 
  
1379 
 The specified local group already exists. 
 ERROR_ALIAS_EXISTS 
  
1380 
 Logon failure: the user has not been granted the requested logon type at this computer. 
 ERROR_LOGON_NOT_GRANTED 
  
1381 
 The maximum number of secrets that may be stored in a single system has been exceeded. 
 ERROR_TOO_MANY_SECRETS 
  
1382 
 The length of a secret exceeds the maximum length allowed. 
 ERROR_SECRET_TOO_LONG 
  
1383 
 The local security authority database contains an internal inconsistency. 
 ERROR_INTERNAL_DB_ERROR 
  
1384 
 During a logon attempt, the user's security context accumulated too many security IDs. 
 ERROR_TOO_MANY_CONTEXT_IDS 
  
1385 
 Logon failure: the user has not been granted the requested logon type at this computer. 
 ERROR_LOGON_TYPE_NOT_GRANTED 
  
1386 
 A cross-encrypted password is necessary to change a user password. 
 ERROR_NT_CROSS_ENCRYPTION_REQUIRED 
  
1387 
 A new member could not be added to a local group because the member does not exist. 
 ERROR_NO_SUCH_MEMBER 
  
1388 
 A new member could not be added to a local group because the member has the wrong account type. 
 ERROR_INVALID_MEMBER 
  
1389 
 Too many security IDs have been specified. 
 ERROR_TOO_MANY_SIDS 
  
1390 
 A cross-encrypted password is necessary to change this user password. 
 ERROR_LM_CROSS_ENCRYPTION_REQUIRED 
  
1391 
 Indicates an ACL contains no inheritable components. 
 ERROR_NO_INHERITANCE 
  
1392 
 The file or directory is corrupted and non-readable. 
 ERROR_FILE_CORRUPT 
  
1393 
 The disk structure is corrupted and non-readable. 
 ERROR_DISK_CORRUPT 
  
1394 
 There is no user session key for the specified logon session. 
 ERROR_NO_USER_SESSION_KEY 
  
1395 
 The service being accessed is licensed for a particular number of connections. No more connections can be made to the service at this time because there are already as many connections as the service can accept. 
 ERROR_LICENSE_QUOTA_EXCEEDED 
  
1400 
 Invalid window handle. 
 ERROR_INVALID_WINDOW_HANDLE 
  
1401 
 Invalid menu handle. 
 ERROR_INVALID_MENU_HANDLE 
  
1402 
 Invalid cursor handle. 
 ERROR_INVALID_CURSOR_HANDLE 
  
1403 
 Invalid accelerator table handle. 
 ERROR_INVALID_ACCEL_HANDLE 
  
1404 
 Invalid hook handle. 
 ERROR_INVALID_HOOK_HANDLE 
  
1405 
 Invalid handle to a multiple-window position structure. 
 ERROR_INVALID_DWP_HANDLE 
  
1406 
 Cannot create a top-level child window. 
 ERROR_TLW_WITH_WSCHILD 
  
1407 
 Cannot find window class. 
 ERROR_CANNOT_FIND_WND_CLASS 
  
1408 
 Invalid window, it belongs to another thread. 
 ERROR_WINDOW_OF_OTHER_THREAD 
  
1409 
 Hot key is already registered. 
 ERROR_HOTKEY_ALREADY_REGISTERED 
  
1410 
 Class already exists. 
 ERROR_CLASS_ALREADY_EXISTS 
  
1411 
 Class does not exist. 
 ERROR_CLASS_DOES_NOT_EXIST 
  
1412 
 Class still has open windows. 
 ERROR_CLASS_HAS_WINDOWS 
  
1413 
 Invalid index. 
 ERROR_INVALID_INDEX 
  
1414 
 Invalid icon handle. 
 ERROR_INVALID_ICON_HANDLE 
  
1415 
 Using private DIALOG window words. 
 ERROR_PRIVATE_DIALOG_INDEX 
  
1416 
 The list box identifier was not found. 
 ERROR_LISTBOX_ID_NOT_FOUND 
  
1417 
 No wildcards were found. 
 ERROR_NO_WILDCARD_CHARACTERS 
  
1418 
 Thread does not have a clipboard open. 
 ERROR_CLIPBOARD_NOT_OPEN 
  
1419 
 Hot key is not registered. 
 ERROR_HOTKEY_NOT_REGISTERED 
  
1420 
 The window is not a valid dialog window. 
 ERROR_WINDOW_NOT_DIALOG 
  
1421 
 Control ID not found. 
 ERROR_CONTROL_ID_NOT_FOUND 
  
1422 
 Invalid message for a combo box because it does not have an edit control. 
 ERROR_INVALID_COMBOBOX_MESSAGE 
  
1423 
 The window is not a combo box. 
 ERROR_WINDOW_NOT_COMBOBOX 
  
1424 
 Height must be less than 256. 
 ERROR_INVALID_EDIT_HEIGHT 
  
1425 
 Invalid device context (DC) handle. 
 ERROR_DC_NOT_FOUND 
  
1426 
 Invalid hook procedure type. 
 ERROR_INVALID_HOOK_FILTER 
  
1427 
 Invalid hook procedure. 
 ERROR_INVALID_FILTER_PROC 
  
1428 
 Cannot set nonlocal hook without a module handle. 
 ERROR_HOOK_NEEDS_HMOD 
  
1429 
 This hook procedure can only be set globally. 
 ERROR_GLOBAL_ONLY_HOOK 
  
1430 
 The journal hook procedure is already installed. 
 ERROR_JOURNAL_HOOK_SET 
  
1431 
 The hook procedure is not installed. 
 ERROR_HOOK_NOT_INSTALLED 
  
1432 
 Invalid message for single-selection list box. 
 ERROR_INVALID_LB_MESSAGE 
  
1433 
 LB_SETCOUNT sent to non-lazy list box. 
 ERROR_SETCOUNT_ON_BAD_LB 
  
1434 
 This list box does not support tab stops. 
 ERROR_LB_WITHOUT_TABSTOPS 
  
1435 
 Cannot destroy object created by another thread. 
 ERROR_DESTROY_OBJECT_OF_OTHER_THREAD 
  
1436 
 Child windows cannot have menus. 
 ERROR_CHILD_WINDOW_MENU 
  
1437 
 The window does not have a system menu. 
 ERROR_NO_SYSTEM_MENU 
  
1438 
 Invalid message box style. 
 ERROR_INVALID_MSGBOX_STYLE 
  
1439 
 Invalid system-wide (SPI_*) parameter. 
 ERROR_INVALID_SPI_VALUE 
  
1440 
 Screen already locked. 
 ERROR_SCREEN_ALREADY_LOCKED 
  
1441 
 All handles to windows in a multiple-window position structure must have the same parent. 
 ERROR_HWNDS_HAVE_DIFF_PARENT 
  
1442 
 The window is not a child window. 
 ERROR_NOT_CHILD_WINDOW 
  
1443 
 Invalid GW_* command. 
 ERROR_INVALID_GW_COMMAND 
  
1444 
 Invalid thread identifier. 
 ERROR_INVALID_THREAD_ID 
  
1445 
 Cannot process a message from a window that is not a multiple document interface (MDI) window. 
 ERROR_NON_MDICHILD_WINDOW 
  
1446 
 Popup menu already active. 
 ERROR_POPUP_ALREADY_ACTIVE 
  
1447 
 The window does not have scroll bars. 
 ERROR_NO_SCROLLBARS 
  
1448 
 Scroll bar range cannot be greater than 0x7FFF. 
 ERROR_INVALID_SCROLLBAR_RANGE 
  
1449 
 Cannot show or remove the window in the way specified. 
 ERROR_INVALID_SHOWWIN_COMMAND 
  
1450 
 Insufficient system resources exist to complete the requested service. 
 ERROR_NO_SYSTEM_RESOURCES 
  
1451 
 Insufficient system resources exist to complete the requested service. 
 ERROR_NONPAGED_SYSTEM_RESOURCES 
  
1452 
 Insufficient system resources exist to complete the requested service. 
 ERROR_PAGED_SYSTEM_RESOURCES 
  
1453 
 Insufficient quota to complete the requested service. 
 ERROR_WORKING_SET_QUOTA 
  
1454 
 Insufficient quota to complete the requested service. 
 ERROR_PAGEFILE_QUOTA 
  
1455 
 The paging file is too small for this operation to complete. 
 ERROR_COMMITMENT_LIMIT 
  
1456 
 A menu item was not found. 
 ERROR_MENU_ITEM_NOT_FOUND 
  
1457 
 Invalid keyboard layout handle. 
 ERROR_INVALID_KEYBOARD_HANDLE 
  
1458 
 Hook type not allowed. 
 ERROR_HOOK_TYPE_NOT_ALLOWED 
  
1459 
 This operation requires an interactive window station. 
 ERROR_REQUIRES_INTERACTIVE_WINDOWSTATION 
  
1460 
 This operation returned because the time-out period expired. 
 ERROR_TIMEOUT 
  
1500 
 The event log file is corrupted. 
 ERROR_EVENTLOG_FILE_CORRUPT 
  
1501 
 No event log file could be opened, so the event logging service did not start. 
 ERROR_EVENTLOG_CANT_START 
  
1502 
 The event log file is full. 
 ERROR_LOG_FILE_FULL 
  
1503 
 The event log file has changed between read operations. 
 ERROR_EVENTLOG_FILE_CHANGED 
  
1700 
 The string binding is invalid. 
 RPC_S_INVALID_STRING_BINDING 
  
1701 
 The binding handle is not the correct type. 
 RPC_S_WRONG_KIND_OF_BINDING 
  
1702 
 The binding handle is invalid. 
 RPC_S_INVALID_BINDING 
  
1703 
 The RPC protocol sequence is not supported. 
 RPC_S_PROTSEQ_NOT_SUPPORTED 
  
1704 
 The RPC protocol sequence is invalid. 
 RPC_S_INVALID_RPC_PROTSEQ 
  
1705 
 The string universal unique identifier (UUID) is invalid. 
 RPC_S_INVALID_STRING_UUID 
  
1706 
 The endpoint format is invalid. 
 RPC_S_INVALID_ENDPOINT_FORMAT 
  
1707 
 The network address is invalid. 
 RPC_S_INVALID_NET_ADDR 
  
1708 
 No endpoint was found. 
 RPC_S_NO_ENDPOINT_FOUND 
  
1709 
 The time-out value is invalid. 
 RPC_S_INVALID_TIMEOUT 
  
1710 
 The object universal unique identifier (UUID) was not found. 
 RPC_S_OBJECT_NOT_FOUND 
  
1711 
 The object universal unique identifier (UUID) has already been registered. 
 RPC_S_ALREADY_REGISTERED 
  
1712 
 The type universal unique identifier (UUID) has already been registered. 
 RPC_S_TYPE_ALREADY_REGISTERED 
  
1713 
 The RPC server is already listening. 
 RPC_S_ALREADY_LISTENING 
  
1714 
 No protocol sequences have been registered. 
 RPC_S_NO_PROTSEQS_REGISTERED 
  
1715 
 The RPC server is not listening. 
 RPC_S_NOT_LISTENING 
  
1716 
 The manager type is unknown. 
 RPC_S_UNKNOWN_MGR_TYPE 
  
1717 
 The interface is unknown. 
 RPC_S_UNKNOWN_IF 
  
1718 
 There are no bindings. 
 RPC_S_NO_BINDINGS 
  
1719 
 There are no protocol sequences. 
 RPC_S_NO_PROTSEQS 
  
1720 
 The endpoint cannot be created. 
 RPC_S_CANT_CREATE_ENDPOINT 
  
1721 
 Not enough resources are available to complete this operation. 
 RPC_S_OUT_OF_RESOURCES 
  
1722 
 The RPC server is unavailable. 
 RPC_S_SERVER_UNAVAILABLE 
  
1723 
 The RPC server is too busy to complete this operation. 
 RPC_S_SERVER_TOO_BUSY 
  
1724 
 The network options are invalid. 
 RPC_S_INVALID_NETWORK_OPTIONS 
  
1725 
 There is not a remote procedure call active in this thread. 
 RPC_S_NO_CALL_ACTIVE 
  
1726 
 The remote procedure call failed. 
 RPC_S_CALL_FAILED 
  
1727 
 The remote procedure call failed and did not execute. 
 RPC_S_CALL_FAILED_DNE 
  
1728 
 A remote procedure call (RPC) protocol error occurred. 
 RPC_S_PROTOCOL_ERROR 
  
1730 
 The transfer syntax is not supported by the RPC server. 
 RPC_S_UNSUPPORTED_TRANS_SYN 
  
1732 
 The universal unique identifier (UUID) type is not supported. 
 RPC_S_UNSUPPORTED_TYPE 
  
1733 
 The tag is invalid. 
 RPC_S_INVALID_TAG 
  
1734 
 The array bounds are invalid. 
 RPC_S_INVALID_BOUND 
  
1735 
 The binding does not contain an entry name. 
 RPC_S_NO_ENTRY_NAME 
  
1736 
 The name syntax is invalid. 
 RPC_S_INVALID_NAME_SYNTAX 
  
1737 
 The name syntax is not supported. 
 RPC_S_UNSUPPORTED_NAME_SYNTAX 
  
1739 
 No network address is available to use to construct a universal unique identifier (UUID). 
 RPC_S_UUID_NO_ADDRESS 
  
1740 
 The endpoint is a duplicate. 
 RPC_S_DUPLICATE_ENDPOINT 
  
1741 
 The authentication type is unknown. 
 RPC_S_UNKNOWN_AUTHN_TYPE 
  
1742 
 The maximum number of calls is too small. 
 RPC_S_MAX_CALLS_TOO_SMALL 
  
1743 
 The string is too long. 
 RPC_S_STRING_TOO_LONG 
  
1744 
 The RPC protocol sequence was not found. 
 RPC_S_PROTSEQ_NOT_FOUND 
  
1745 
 The procedure number is out of range. 
 RPC_S_PROCNUM_OUT_OF_RANGE 
  
1746 
 The binding does not contain any authentication information. 
 RPC_S_BINDING_HAS_NO_AUTH 
  
1747 
 The authentication service is unknown. 
 RPC_S_UNKNOWN_AUTHN_SERVICE 
  
1748 
 The authentication level is unknown. 
 RPC_S_UNKNOWN_AUTHN_LEVEL 
  
1749 
 The security context is invalid. 
 RPC_S_INVALID_AUTH_IDENTITY 
  
1750 
 The authorization service is unknown. 
 RPC_S_UNKNOWN_AUTHZ_SERVICE 
  
1751 
 The entry is invalid. 
 EPT_S_INVALID_ENTRY 
  
1752 
 The server endpoint cannot perform the operation. 
 EPT_S_CANT_PERFORM_OP 
  
1753 
 There are no more endpoints available from the endpoint mapper. 
 EPT_S_NOT_REGISTERED 
  
1754 
 No interfaces have been exported. 
 RPC_S_NOTHING_TO_EXPORT 
  
1755 
 The entry name is incomplete. 
 RPC_S_INCOMPLETE_NAME 
  
1756 
 The version option is invalid. 
 RPC_S_INVALID_VERS_OPTION 
  
1757 
 There are no more members. 
 RPC_S_NO_MORE_MEMBERS 
  
1758 
 There is nothing to unexport. 
 RPC_S_NOT_ALL_OBJS_UNEXPORTED 
  
1759 
 The interface was not found. 
 RPC_S_INTERFACE_NOT_FOUND 
  
1760 
 The entry already exists. 
 RPC_S_ENTRY_ALREADY_EXISTS 
  
1761 
 The entry is not found. 
 RPC_S_ENTRY_NOT_FOUND 
  
1762 
 The name service is unavailable. 
 RPC_S_NAME_SERVICE_UNAVAILABLE 
  
1763 
 The network address family is invalid. 
 RPC_S_INVALID_NAF_ID 
  
1764 
 The requested operation is not supported. 
 RPC_S_CANNOT_SUPPORT 
  
1765 
 No security context is available to allow impersonation. 
 RPC_S_NO_CONTEXT_AVAILABLE 
  
1766 
 An internal error occurred in a remote procedure call (RPC). 
 RPC_S_INTERNAL_ERROR 
  
1767 
 The RPC server attempted an integer division by zero. 
 RPC_S_ZERO_DIVIDE 
  
1768 
 An addressing error occurred in the RPC server. 
 RPC_S_ADDRESS_ERROR 
  
1769 
 A floating-point operation at the RPC server caused a division by zero. 
 RPC_S_FP_DIV_ZERO 
  
1770 
 A floating-point underflow occurred at the RPC server. 
 RPC_S_FP_UNDERFLOW 
  
1771 
 A floating-point overflow occurred at the RPC server. 
 RPC_S_FP_OVERFLOW 
  
1772 
 The list of RPC servers available for the binding of auto handles has been exhausted. 
 RPC_X_NO_MORE_ENTRIES 
  
1773 
 Unable to open the character translation table file. 
 RPC_X_SS_CHAR_TRANS_OPEN_FAIL 
  
1774 
 The file containing the character translation table has fewer than 512 bytes. 
 RPC_X_SS_CHAR_TRANS_SHORT_FILE 
  
1775 
 A null context handle was passed from the client to the host during a remote procedure call. 
 RPC_X_SS_IN_NULL_CONTEXT 
  
1777 
 The context handle changed during a remote procedure call. 
 RPC_X_SS_CONTEXT_DAMAGED 
  
1778 
 The binding handles passed to a remote procedure call do not match. 
 RPC_X_SS_HANDLES_MISMATCH 
  
1779 
 The stub is unable to get the remote procedure call handle. 
 RPC_X_SS_CANNOT_GET_CALL_HANDLE 
  
1780 
 A null reference pointer was passed to the stub. 
 RPC_X_NULL_REF_POINTER 
  
1781 
 The enumeration value is out of range. 
 RPC_X_ENUM_VALUE_OUT_OF_RANGE 
  
1782 
 The byte count is too small. 
 RPC_X_BYTE_COUNT_TOO_SMALL 
  
1783 
 The stub received bad data. 
 RPC_X_BAD_STUB_DATA 
  
1784 
 The supplied user buffer is not valid for the requested operation. 
 ERROR_INVALID_USER_BUFFER 
  
1785 
 The disk media is not recognized. It may not be formatted. 
 ERROR_UNRECOGNIZED_MEDIA 
  
1786 
 The workstation does not have a trust secret. 
 ERROR_NO_TRUST_LSA_SECRET 
  
1787 
 The SAM database on the Windows NT Server does not have a computer account for this workstation trust relationship. 
 ERROR_NO_TRUST_SAM_ACCOUNT 
  
1788 
 The trust relationship between the primary domain and the trusted domain failed. 
 ERROR_TRUSTED_DOMAIN_FAILURE 
  
1789 
 The trust relationship between this workstation and the primary domain failed. 
 ERROR_TRUSTED_RELATIONSHIP_FAILURE 
  
1790 
 The network logon failed. 
 ERROR_TRUST_FAILURE 
  
1791 
 A remote procedure call is already in progress for this thread. 
 RPC_S_CALL_IN_PROGRESS 
  
1792 
 An attempt was made to logon, but the network logon service was not started. 
 ERROR_NETLOGON_NOT_STARTED 
  
1793 
 The user's account has expired. 
 ERROR_ACCOUNT_EXPIRED 
  
1794 
 The redirector is in use and cannot be unloaded. 
 ERROR_REDIRECTOR_HAS_OPEN_HANDLES 
  
1795 
 The specified printer driver is already installed. 
 ERROR_PRINTER_DRIVER_ALREADY_INSTALLED 
  
1796 
 The specified port is unknown. 
 ERROR_UNKNOWN_PORT 
  
1797 
 The printer driver is unknown. 
 ERROR_UNKNOWN_PRINTER_DRIVER 
  
1798 
 The print processor is unknown. 
 ERROR_UNKNOWN_PRINTPROCESSOR 
  
1799 
 The specified separator file is invalid. 
 ERROR_INVALID_SEPARATOR_FILE 
  
1800 
 The specified priority is invalid. 
 ERROR_INVALID_PRIORITY 
  
1801 
 The printer name is invalid. 
 ERROR_INVALID_PRINTER_NAME 
  
1802 
 The printer already exists. 
 ERROR_PRINTER_ALREADY_EXISTS 
  
1803 
 The printer command is invalid. 
 ERROR_INVALID_PRINTER_COMMAND 
  
1804 
 The specified data type is invalid. 
 ERROR_INVALID_DATATYPE 
  
1805 
 The environment specified is invalid. 
 ERROR_INVALID_ENVIRONMENT 
  
1806 
 There are no more bindings. 
 RPC_S_NO_MORE_BINDINGS 
  
1807 
 The account used is an interdomain trust account. Use your global user account or local user account to access this server. 
 ERROR_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT 
  
1808 
 The account used is a computer account. Use your global user account or local user account to access this server. 
 ERROR_NOLOGON_WORKSTATION_TRUST_ACCOUNT 
  
1809 
 The account used is a server trust account. Use your global user account or local user account to access this server. 
 ERROR_NOLOGON_SERVER_TRUST_ACCOUNT 
  
1810 
 The name or security ID (SID) of the domain specified is inconsistent with the trust information for that domain. 
 ERROR_DOMAIN_TRUST_INCONSISTENT 
  
1811 
 The server is in use and cannot be unloaded. 
 ERROR_SERVER_HAS_OPEN_HANDLES 
  
1812 
 The specified image file did not contain a resource section. 
 ERROR_RESOURCE_DATA_NOT_FOUND 
  
1813 
 The specified resource type cannot be found in the image file. 
 ERROR_RESOURCE_TYPE_NOT_FOUND 
  
1814 
 The specified resource name cannot be found in the image file. 
 ERROR_RESOURCE_NAME_NOT_FOUND 
  
1815 
 The specified resource language ID cannot be found in the image file. 
 ERROR_RESOURCE_LANG_NOT_FOUND 
  
1816 
 Not enough quota is available to process this command. 
 ERROR_NOT_ENOUGH_QUOTA 
  
1817 
 No interfaces have been registered. 
 RPC_S_NO_INTERFACES 
  
1818 
 The server was altered while processing this call. 
 RPC_S_CALL_CANCELLED 
  
1819 
 The binding handle does not contain all required information. 
 RPC_S_BINDING_INCOMPLETE 
  
1820 
 Communications failure. 
 RPC_S_COMM_FAILURE 
  
1821 
 The requested authentication level is not supported. 
 RPC_S_UNSUPPORTED_AUTHN_LEVEL 
  
1822 
 No principal name registered. 
 RPC_S_NO_PRINC_NAME 
  
1823 
 The error specified is not a valid Windows NT RPC error code. 
 RPC_S_NOT_RPC_ERROR 
  
1824 
 A UUID that is valid only on this computer has been allocated. 
 RPC_S_UUID_LOCAL_ONLY 
  
1825 
 A security package specific error occurred. 
 RPC_S_SEC_PKG_ERROR 
  
1826 
 Thread is not canceled. 
 RPC_S_NOT_CANCELLED 
  
1827 
 Invalid operation on the encoding/decoding handle. 
 RPC_X_INVALID_ES_ACTION 
  
1828 
 Incompatible version of the serializing package. 
 RPC_X_WRONG_ES_VERSION 
  
1829 
 Incompatible version of the RPC stub. 
 RPC_X_WRONG_STUB_VERSION 
  
1830 
 The idl pipe object is invalid or corrupted. 
 RPC_X_INVALID_PIPE_OBJECT 
  
1831 
 The operation is invalid for a given idl pipe object. 
 RPC_X_INVALID_PIPE_OPERATION 
  
1832 
 The idl pipe version is not supported. 
 RPC_X_WRONG_PIPE_VERSION 
  
1898 
 The group member was not found. 
 RPC_S_GROUP_MEMBER_NOT_FOUND 
  
1899 
 The endpoint mapper database could not be created. 
 EPT_S_CANT_CREATE 
  
1900 
 The object universal unique identifier (UUID) is the nil UUID. 
 RPC_S_INVALID_OBJECT 
  
1901 
 The specified time is invalid. 
 ERROR_INVALID_TIME 
  
1902 
 The specified form name is invalid. 
 ERROR_INVALID_FORM_NAME 
  
1903 
 The specified form size is invalid. 
 ERROR_INVALID_FORM_SIZE 
  
1904 
 The specified printer handle is already being waited on 
 ERROR_ALREADY_WAITING 
  
1905 
 The specified printer has been deleted. 
 ERROR_PRINTER_DELETED 
  
1906 
 The state of the printer is invalid. 
 ERROR_INVALID_PRINTER_STATE 
  
1907 
 The user must change his password before he logs on the first time. 
 ERROR_PASSWORD_MUST_CHANGE 
  
1908 
 Could not find the domain controller for this domain. 
 ERROR_DOMAIN_CONTROLLER_NOT_FOUND 
  
1909 
 The referenced account is currently locked out and may not be logged on to. 
 ERROR_ACCOUNT_LOCKED_OUT 
  
1910 
 The object exporter specified was not found. 
 OR_INVALID_OXID 
  
1911 
 The object specified was not found. 
 OR_INVALID_OID 
  
1912 
 The object resolver set specified was not found. 
 OR_INVALID_SET 
  
1913 
 Some data remains to be sent in the request buffer. 
 RPC_S_SEND_INCOMPLETE 
  
2000 
 The pixel format is invalid. 
 ERROR_INVALID_PIXEL_FORMAT 
  
2001 
 The specified driver is invalid. 
 ERROR_BAD_DRIVER 
  
2002 
 The window style or class attribute is invalid for this operation. 
 ERROR_INVALID_WINDOW_STYLE 
  
2003 
 The requested metafile operation is not supported. 
 ERROR_METAFILE_NOT_SUPPORTED 
  
2004 
 The requested transformation operation is not supported. 
 ERROR_TRANSFORM_NOT_SUPPORTED 
  
2005 
 The requested clipping operation is not supported. 
 ERROR_CLIPPING_NOT_SUPPORTED 
  
2202 
 The specified user name is invalid. 
 ERROR_BAD_USERNAME 
  
2250 
 This network connection does not exist. 
 ERROR_NOT_CONNECTED 
  
2401 
 This network connection has files open or requests pending. 
 ERROR_OPEN_FILES 
  
2402 
 Active connections still exist. 
 ERROR_ACTIVE_CONNECTIONS 
  
2404 
 The device is in use by an active process and cannot be disconnected. 
 ERROR_DEVICE_IN_USE 
  
3000 
 The specified print monitor is unknown. 
 ERROR_UNKNOWN_PRINT_MONITOR 
  
3001 
 The specified printer driver is currently in use. 
 ERROR_PRINTER_DRIVER_IN_USE 
  
3002 
 The spool file was not found. 
 ERROR_SPOOL_FILE_NOT_FOUND 
  
3003 
 A StartDocPrinter call was not issued. 
 ERROR_SPL_NO_STARTDOC 
  
3004 
 An AddJob call was not issued. 
 ERROR_SPL_NO_ADDJOB 
  
3005 
 The specified print processor has already been installed. 
 ERROR_PRINT_PROCESSOR_ALREADY_INSTALLED 
  
3006 
 The specified print monitor has already been installed. 
 ERROR_PRINT_MONITOR_ALREADY_INSTALLED 
  
3007 
 The specified print monitor does not have the required functions. 
 ERROR_INVALID_PRINT_MONITOR 
  
3008 
 The specified print monitor is currently in use. 
 ERROR_PRINT_MONITOR_IN_USE 
  
3009 
 The requested operation is not allowed when there are jobs queued to the printer. 
 ERROR_PRINTER_HAS_JOBS_QUEUED 
  
3010 
 The requested operation is successful. Changes will not be effective until the system is rebooted. 
 ERROR_SUCCESS_REBOOT_REQUIRED 
  
3011 
 The requested operation is successful. Changes will not be effective until the service is restarted. 
 ERROR_SUCCESS_RESTART_REQUIRED 
  
4000 
 WINS encountered an error while processing the command. 
 ERROR_WINS_INTERNAL 
  
4001 
 The local WINS can not be deleted. 
 ERROR_CAN_NOT_DEL_LOCAL_WINS 
  
4002 
 The importation from the file failed. 
 ERROR_STATIC_INIT 
  
4003 
 The backup failed. Was a full backup done before? 
 ERROR_INC_BACKUP 
  
4004 
 The backup failed. Check the directory to which you are backing the database. 
 ERROR_FULL_BACKUP 
  
4005 
 The name does not exist in the WINS database. 
 ERROR_REC_NON_EXISTENT 
  
4006 
 Replication with a nonconfigured partner is not allowed. 
 ERROR_RPL_NOT_ALLOWED 
  
6118 
 The list of servers for this workgroup is not currently available 
 ERROR_NO_BROWSER_SERVERS_FOUND 
  
10053 
 Connection aborted. (An established connection was aborted by the software in your host machine.) 
 WSAECONNABORTED 
  
10054 
 Connection reset by peer. (An existing connection was forcibly closed by the remote host) 
 WSAECONNRESET
victorhugomuniz
Moderador
Moderador
Posts: 1396
Joined: Fri, 01 Feb 2008 2:06 pm
Location: Rio de Janeiro - RJ
Contact:
:D

grateful for the contribution
User avatar
lincolnrn
Rank: Estagiário Sênior
Rank: Estagiário Sênior
Posts: 13
Joined: Tue, 05 Jan 2010 9:41 am
Location: Contagem-MG
Contact:
Lincoln Rocha Nogueira
www.tecconect.com

Give me a light how to solve the 1019 to pick up here ...
diegolenhardt
Moderador
Moderador
Posts: 1177
Joined: Thu, 15 Oct 2009 10:28 am
Location: Recife

Is not it disk space?
Post Reply
  • Information
  • Who is online

    Users browsing this forum: No registered users and 8 guests